Saltar al contenido

Wholesale asbestos abatement supplies for contractors

INLINE Distributing sells asbestos abatement supplies in contractor quantities from 17 branches in 13 states: 6 mil poly, poly tape by the case, printed disposal bags by the roll, AVAIL glove bags, Fiberlock and Foster encapsulants and Sentinel mastic removers in 5 gallon pails, 3M and North respirators with P100 filters, coveralls by the case, D-Con decon showers and HEPA vacuums. Order online or by quote; approved business accounts can get Net-30 terms.

Job checklistSolicitar cotizaciónDepartamento de pedidos 1-800-795-0933Find a branch

At a glance

  • Yellow printed 6 mil asbestos bags come 100 per roll at 30 x 40 in and 75 per roll at 33 x 50 in.
  • AVAIL glove bags run from the M6, 22 x 60 in for pipe up to 6 in, to the QT-30 for 18 to 30 in pipe.
  • Fiberlock Fiberset PM lockdown covers 350 to 500 sq ft per gallon on porous surfaces and over 500 on smooth ones, per the maker.
  • 3M 2091 P100 filters list 6000, 7000 and FF-400 series masks; 3M 7093 P100 filters list 5000, 6000 and 7000 series.
  • Scapa 133 poly tape is 7.5 mil, packed 24 rolls per case at 48 mm, 16 at 72 mm and 12 at 96 mm.
  • Paste part numbers on the Quick Order page, send a list through the quote form, or call the order desk at 1-800-795-0933.

Asbestos abatement supply checklist by job phase

Use this as the order list for one containment, from the first sign on the door to the last sealed bag. Quantities depend on the work area and your project specification, so each row names what to order and the shelf where it lives. Copy the part numbers from each shelf into one Quick Order list or one quote request.

Job checklist

0 of 9 job phases covered

Check off each line as you load the truck. Your checks stay in this browser on this device.

Abatement supplies by job phase, with the INLINE shelf for each
Have itJob phaseSuppliesWhere to find them
Job phaseSigns and perimeterSupplies14 x 20 in AHS-3 asbestos signs in English or Spanish (100 pack), 11 x 17 in asbestos signs, 3 in x 1,000 ft Danger Asbestos barricade tapeWhere to find themWarning Labels and Signs, Barricade Tapes
Job phaseContainment setupSupplies6 mil clear, black, flame retardant or diamond scrim poly; Scapa 133 or Inline 757 poly tape; Shurtape DS154 double-sided tape; ZipWall poles; 3M Super 77Where to find themPoly Sheeting, Scrim Poly, Containment Poly Tapes, Containment Poles, Spray Adhesives
Job phaseNegative air and pressureSuppliesHEPA negative air machines, spare HEPA filters and pre-filters, OmniGuard 6 or PressurePro differential pressure recorderWhere to find themNegative Air Machines, Air Scrubber Filters, Pressure Recorders
Job phaseWorker protectionSupplies3M 6100 or 7500 series half masks, 6700, 6800 or 6900 full face masks, Powerflow PAPR, 2091 or 7093 P100 filters, hooded coveralls with boots, nitrile glovesWhere to find themRespiratory Protection, Disposable Coveralls, Nitrile Gloves
Job phaseWet removalSuppliesPenewet or Safeguard wetting agent, Foster 32-60 removal encapsulant, scrapers, glove bags for pipe insulationWhere to find themFoaming and Wetting Agents, Asbestos Encapsulants, Scrapers, Glove Bags
Job phaseFloor tile and masticSuppliesSentinel 747, 7200 or 909, ILC Dover Control Green, Blue Bear 500MR, Safeguard Low Odor, Mastasorb absorbentWhere to find themMastic Removers, Mastasorb
Job phaseCleanup and lockdownSuppliesHEPA vacuums from 4 to 12 gal, Fiberlock Fiberset PM, Safeguard Lockdown clear or white, Foster 32-22 ProtektorWhere to find themHEPA Vacuums, Asbestos Encapsulants
Job phaseWaste packagingSuppliesPrinted 6 mil asbestos bags, 3 x 5 in asbestos labels with generator info and 6 x 6 in hazardous waste labels (500 per roll)Where to find themAsbestos Bags, Warning Labels and Signs
Job phaseDecontaminationSuppliesD-Con 3-stage poly showers, 77 in or 81 in pole sets, D-Con shower hardware, 6 ft connector hose, ACSI HF2 or Qwik Flo II two-stage water filters, 10 in spunbond cartridgesWhere to find themDecon Showers, Decon Poles, Water Filtration

Send your list in a quote requestPaste part numbers into Quick Order

Who sells wholesale asbestos abatement supplies

INLINE Distributing has supplied the building industry since 1978 and sells abatement supplies to contractors from 17 branches in 13 states, from Sylmar, California to Moonachie, New Jersey. Wholesale here means contractor quantities on a business account: product packed by the case, roll, pail or drum, a full job list quoted as one order, and Net-30 terms for approved business accounts. Start an account request through the quote form.

The abatement industry page groups the shelves by trade. The packs below are the units most abatement job lists are built from, with the part numbers to paste into one order.

How common abatement supplies are packed
ItemPackPart number
ItemYellow printed asbestos bags, 6 mil, 33 x 50 inPack75 per rollPart number660161
ItemAVAIL 4460Ext glove bag, 44 x 60 inPack25 per rollPart number660002
ItemScapa 133 white poly tape, 48 mm, 7.5 milPack24 rolls per casePart number880204
ItemProtega microporous coverall with hood and boots, XLPack25 per casePart number440058
ItemFiberlock Penewet wetting agentPack5 gal pailPart number800003
ItemSafeguard Low Odor Mastic RemoverPack5 gal pail or 55 gal drumPart number800098, 800251
ItemAsbestos label with generator info, 3 x 5 inPack500 per rollPart number650023

Containment supplies: 6 mil poly, poly tape and poles

INLINE's 6 mil film comes in four types. Clear runs 8 to 40 ft wide on 100 ft rolls, black comes 12, 20 and 40 ft wide, flame retardant comes 10 x 100, 12 x 100 and 20 x 40 ft, and diamond scrim reinforced comes 20 x 100 and 40 x 100 ft. Black hides the work from occupants and the street, flame retardant goes where the project specification names it, and diamond scrim stops a puncture from running into a long tear on wind-loaded or dragged film.

Count film by layers, not by room. A 12 x 14 ft room with a 9 ft ceiling has 168 sq ft of floor and 468 sq ft of wall. Two layers on each come to 1,272 sq ft; add about 10 percent for laps and the floor run up the wall and you need roughly 1,400 sq ft, so one 6 mil 20 x 100 ft roll (2,000 sq ft) covers it with film left for critical barriers on windows, doors and vents. For multi-room takeoffs, see bulk poly sheeting.

  • Scapa 133: 7.5 mil polyethylene seaming tape, serrated or non-serrated, red or white, 48 mm (24 per case), 72 mm (16) or 96 mm (12).
  • Inline 757: 7 mil high-tack poly tape, 48 mm (24 per case) or 72 mm (16).
  • Shurtape DS154: 48 mm x 25 yd double-sided crepe tape for hanging poly on walls, 24 rolls per case.
  • ZipWall: 12 ft and 20 ft spring-loaded poles, and heavy-duty zippers (2 per pack) for a doorway.
Containment under negative pressure, plan viewA poly walled work area with a three chamber decon at the left end: clean room, shower and equipment room. Makeup air enters through the decon, sweeps across the work area and reaches two negative air machines at the right end, which exhaust through flex duct and the outside wall. A manometer reads across the barrier at the top, and a waste load-out leaves from the bottom wall.Outdoors
  1. 1. Work area: poly walls and floor, held under negative pressure
  2. 2. Clean room, the entry from outside the containment
  3. 3. Ducha
  4. 4. Equipment room, next to the work area
  5. 5. Makeup air enters through the decon chambers, at the end opposite the machines
  6. 6. Air sweeps across the work area toward the machines, so clean air crosses the workers toward the HEPA units
  7. 7. Negative air machines at the far end from the decon entry
  8. 8. Flex duct carries the exhaust through the wall to outdoors; clamp and tape each joint so it seals
  9. 9. Manometer or pressure recorder reading the difference across the barrier; your project specification sets the target
  10. 10. Waste load-out, where bagged waste leaves the work area

Schematic, not to scale. Chamber sizes, layers and the pressure target come from your project specification.

Plan view of a containment under negative pressure: air comes in through the decon and sweeps across the work area to the negative air machines at the far end.

Asbestos disposal bags and glove bags by size and pack

Yellow printed bags are 6 mil and come 30 x 40 in (100 per roll) and 33 x 50 in (75 per roll). Black printed 6 mil bags come 30 x 37 in by the case and 30 x 40 or 33 x 50 in by the roll. Clear printed bags run 30 x 36 to 36 x 60 in, in several thicknesses; clear no-print 6 mil bags run 26 x 32 to 38 x 60 in, plus a folded 33 x 50 in bag by the case. Crews that double-bag order a printed inner and a larger outer, such as 30 x 40 in inside 33 x 50 in.

Labels come 500 per roll: the 3 x 5 in asbestos danger label with a space for generator information and the 6 x 6 in hazardous waste label. Check your project specification and your waste hauler for which label each bag or drum carries. Browse every bag on the asbestos bags shelf.

AVAIL 6 mil glove bags pack from 40 per case on the M6 (pipe up to 6 in) and 25 per roll on the 4460Ext (up to 8 in) down to 5 per roll on the QT-30 (18 to 30 in). Size them on the glove bag shelf, and order wetting agent and a HEPA vacuum with them to soak the lagging and empty each bag before it comes off the pipe.

Wetting agents, encapsulants and lockdown: coverage per pail

Every product below comes in a 5 gallon pail. Coverage is the maker's figure and varies by substrate.

Pail math: lockdown on 2,400 sq ft of porous deck and walls at 350 sq ft per gallon of Fiberset PM is about 6.9 gallons, or two pails. Penewet at 300 sq ft per gallon on a 1,200 sq ft ceiling is 4 gallons per wetting pass, so one pail covers a single pass with little to spare; order a second if thick or dense material needs another soak. Fiberlock Penewet is applied at full strength with no dilution.

Asbestos chemicals INLINE sells, with maker coverage or mix
ProductRoleCoverage or mix (maker data)
ProductFiberlock PenewetRoleWetting agent, ready to useCoverage or mix (maker data)About 300 to 500 sq ft per gal
ProductSafeguard Surfactant Wetting AgentRoleWetting agentCoverage or mix (maker data)Surfaces 32 to 212 F; coverage varies
ProductFoster 32-60, blueRoleRemoval and post-removal encapsulantCoverage or mix (maker data)Up to 4 parts water to 1 for removal
ProductFiberlock ABCRolePenetrating encapsulant and sealantCoverage or mix (maker data)50 to 100 sq ft per gal smooth, 50 to 75 porous
ProductFiberlock Fiberset PMRolePre-mixed lockdownCoverage or mix (maker data)Over 500 sq ft per gal smooth, 350 to 500 porous
ProductFoster 32-32RoleBridging encapsulant, high buildCoverage or mix (maker data)Can be reinforced with glass cloth
ProductFoster 32-22 ProtektorRolePenetrating encapsulant and lockdownCoverage or mix (maker data)Clear acrylic
ProductFiberlock SerpiFlexRoleConcentrate for all abatement phasesCoverage or mix (maker data)White vinyl acrylic, diluted by use
ProductSafeguard LockdownRoleReady-to-use lockdownCoverage or mix (maker data)Clear or white

Mastic removers for floor tile jobs, and how much to order

Pick the remover by the adhesive and the building. Sentinel 747 is described for black asphalt and solvent-based mastics and the clear thin spread adhesive under 9 in and 12 in vinyl tile, at 100 to 200 sq ft per gallon. For occupied buildings, Sentinel 7200 is under 5 percent VOC by weight with a flash point above 200 F. Order from the floor area: a 1,500 sq ft classroom at 100 to 200 sq ft per gallon of Sentinel 747 takes 7.5 to 15 gallons, two to three pails, before any second coat on heavy ridges.

  • Sentinel 909: soybean-based remover for black asphalt mastic, under 5 percent VOC, flash point above 200 F.
  • Blue Bear Bean E Doo 500MR: soy-based, 20 g/L VOC, about 200 sq ft per gallon, spread by broom or squeegee.
  • ILC Dover Control Green: hydrotreated solvent blend with a mild odor that softens cured floor tile mastics.
  • Neugenic 4175 CA: 0 g/L VOC, mild odor, about 500 sq ft per 5 gallon pail.
  • Safeguard Low Odor: INLINE's own remover, 5 gal pail or 55 gal drum.
  • Mastasorb: a 30 lb bale of wood-fiber absorbent solidifies 2,000 to 2,500 sq ft of liquid mastic so it can be squeegeed up and bagged.

Respirators, P100 filters and coveralls in case quantities

Match filters to the facepiece before you order by the case. The 3M 2091 P100 lists the 6000, 7000 and FF-400 series, and the 3M 7093 P100 lists the 5000, 6000 and 7000 series. The North 7580P100 lists the 7700, 5500, RU8500 and RU8800 half masks and the 5400, RU6500 and 7600 full facepieces.

Count suits by exits, not by workers. A crew of four that leaves through decon for lunch uses eight suits a day, so a 25-suit case lasts about three days. Protega microporous suits (L to 4XL, 25 per case) are on the disposable coveralls shelf; polypropylene spun suits (XL to 3XL) and Lakeland ChemMax 1, both 25 per case, are on the chemical suits shelf.

Respirators and coveralls for abatement crews
ItemSizesDetails from the listing
Item3M 6100 half facepieceSizesSmall, Medium, LargeDetails from the listingThermoplastic elastomer
Item3M 7501, 7502, 7503 half faceSizesSmall, Medium, LargeDetails from the listing7000 series
Item3M 6700, 6800, 6900 full faceSizesSmall, Medium, LargeDetails from the listingSilicone rubber, wide lens
Item3M Powerflow PAPR 6800PF, 6900PFSizesMedium, LargeDetails from the listing4 cfm, 8 hr NiCd battery, Powerflow HEPA filter
ItemDuPont Tyvek 400 coverallSizesM to 4XLDetails from the listing1.2 oz/sq yd, respirator-fit hood, skid-resistant boots
ItemDuPont ProShield 60 coverallSizesL to 4XLDetails from the listing1.8 oz/sq yd microporous film laminate, hood and boots
ItemLakeland ChemMax 1 coverallSizes2XL, 3XLDetails from the listingSerged seams, hood and boots, 25 per case

Decon showers, HEPA vacuums and air monitoring equipment

The ILC Dover D-Con 1002002 is a three-stage disposable shower, 37 x 37 x 77 in, built from two layers of 6 mil poly with triple-flap doorways; the 1001006 is the same size in fire-retardant poly, and the 1001008 is 48 x 48 x 81 in. Poles and nozzle are separate: 77 in (1004001) or 81 in (1004002) pole sets, shower hardware (1005001) and a 6 ft connector hose. Reusable metal showers: the Abatement Technologies Suitcase Shower (81 x 30 x 30 in) and ACSI HFS-2A (31 x 30 x 85 in). Machine sizing is on negative air machines for abatement.

  • Pullman-Holt 102 Series 967792201: 12 gal, 2 hp, 110 cfm, 10 ft crush-proof hose.
  • Pullman-Holt 967850801: 10 gal, 110 cfm, 50 ft cord.
  • ATRIX ATIHCTV5HR: 5 gal disposable filter canister, 99 cfm, H13 HEPA rated 99.97 percent at 0.3 micron.
  • OmniGuard 6: reads plus or minus 0.250 in. water column to 0.003 in. accuracy, with a thermal printer, cellular and Wi-Fi.
  • Air sampling: Zefon Z008BA 25 mm 0.8 micron MCE cassettes for PCM (50 per box), the Sensidyne Gilian BDX-II pump (500 to 3,000 cc/min) and the Allegro jarless pump (0 to 30 LPM).

Ordering a full abatement job list at once

Build the order from this page's checklist, then send it one of three ways. The Quick Order page takes typed or pasted part numbers or an uploaded spreadsheet (CSV or XLSX) and matches each line into the cart or a quote. The quote form takes a pasted list plus up to three attached files, such as a takeoff or the project specification. Or call the order desk at 1-800-795-0933.

Heavy shipments get an LTL Freight option at checkout; mark Lift-gate required when the site has no dock or forklift. Save and share this list in the cart keeps the part numbers and quantities for 180 days, so the same kit can be reordered for the next job. Find a branch to call one directly.

Products mentioned on this page

Questions contractors ask

Who sells asbestos abatement supplies wholesale to contractors?

INLINE Distributing sells abatement supplies in job quantities from 17 branches in 13 states. A whole job list, from poly to decon showers, can go on one order online, through Quick Order, or through a quote request. Approved business accounts can get Net-30 terms; start the account request through the quote form.

What should be on an asbestos abatement supplies list for one job?

A complete list covers nine phases: signs and barricade tape, poly and tape for containment, negative air with spare filters and a pressure recorder, respirators and coveralls, wetting agent and removal encapsulant, mastic remover for floor jobs, HEPA vacuums and lockdown, printed bags and labels, and a decon shower with poles, hardware and water filters.

How many asbestos disposal bags come on a roll?

It depends on the size: INLINE's yellow printed 6 mil bags come 100 per roll at 30 x 40 in and 75 per roll at 33 x 50 in, and the black printed 33 x 50 in bag (660457) is also listed at 75 per roll. The 30 x 37 in black printed bag and the folded clear 33 x 50 in bag come by the case.

How many gallons of lockdown encapsulant do I need for a job?

Divide the surface area by the maker's coverage rate. Fiberlock Fiberset PM lists 350 to 500 sq ft per gallon on porous surfaces and over 500 on smooth ones, so 2,400 sq ft of porous deck and walls at 350 sq ft per gallon needs about 6.9 gallons, which is two 5 gallon pails. Use the low end of the range for rough or absorbent substrates.

How many coveralls does an asbestos crew use per day?

Plan one suit per worker for every exit through decon, not one per worker per day. A crew of four that breaks for lunch outside the containment uses eight suits a day, so a 25-suit case of Protega microporous or polypropylene spun coveralls lasts about three working days.

Which P100 filters fit a 3M 6100 or 7502 half mask?

The 3M 2091 and 3M 7093 P100 filters both list the 6000 and 7000 series, so either fits the 6100 and the 7501, 7502 and 7503. The 2091 also lists the FF-400 series, and the 7093 also lists the 5000 series. Both are sold in pairs on the respiratory protection shelf.

What comes with a disposable decon shower, and what is sold separately?

The ILC Dover D-Con enclosure comes as the poly unit with its spray arm and triple-flap doorways; the poles and the shower nozzle are separate. Order the pole set that matches the unit height, 77 in or 81 in, plus the D-Con shower hardware and a 6 ft connector hose from the decon showers shelf, and a two-stage filter from water filtration.

What mastic remover can I use in an occupied school or hospital?

Sentinel 7200 No Odor Mastic Remover is described for black asphalt and solvent-based mastics in odor-sensitive buildings such as schools and hospitals, with under 5 percent VOC by weight and a flash point above 200 F. Other low-VOC options are Sentinel 909 soy at under 5 percent, Blue Bear 500MR at 20 g/L, Neugenic 4175 CA at 0 g/L with a mild odor, and Safeguard Low Odor.

Can I get Net-30 terms on an abatement supply order?

Yes, Net-30 terms are for approved business accounts at INLINE Distributing. Start the account request through the quote form or call the order desk at 1-800-795-0933; the team sets the account up from there.

Última revisión